SY-HDBT-70T / SY-HDBT-70R
www.sy.co.uk
Specifications
General
HDMI Resolutions
480i, 480p, 720i, 720p, 1080i, 1080p, 1920 x 1200, 4K x 2K
HDMI Standard
HDMI 1.4
HDMI Link Mode
HDBaseT, synchronous switching
Link Transmission Distance
Up to 60 metres with Power over Cable (PoC)
IR Control
38kHz carrier frequency for any control protocol
RS232
Supports Tx and Rx only – Any RS232 baud rates up to 115.2 Kb
Power Supply
24V DC
Power Consumption
SY-HDBT-70P Set: 7.3 W max
Environmental
Operating Temperature
0 – 40 °C
non condensing
Physical
Dimensions (W x H x D)
110 x 30 x 77 mm
Weight
SY-HDBT-70PT: 220 g
SY-HDBT-70PR: 230 g
Troubleshooting
Problem
Possible Cause
Power LED is off
Check that correct power supply as provided with the product is used.
Check the PSU connections and ensure that the PSU is switched on.
If the PSU is at the other end of the RJ-45 cable, check that the cable is
correctly wired and is connected to the local unit.
LINK LED is off
Check that the RJ-45 cable between the transmitter and receiver is
connected with a direct connection and within specified distance.
Check the terminating connectors are wired correctly.
HDMI LED is off
For the transmitter:
Check that the LINK LED is on.
Check that the HDMI source is connected to the HDBT-70PT.
Check that the HDMI source is powered.
For the receiver:
Check that the LINK LED is on.
Check that the HDMI display is connected to the HDBT-70PR.
Check that the HDMI display is powered.
Check that the HDMI display is set to use its HDMI input.