SY-HDBT-100T / SY-HDBT-100R
www.sy.co.uk
Specifications
General
HDMI Resolutions
480i, 480p, 720i, 720p, 1080i, 1080p, 1920 x 1200, 4K x 2K
HDMI Standard
HDMI 1.4 – Supports 3D and Ethernet
HDMI Link Mode
HDBT, synchronous switching
Link Transmission Distance
Up to 100 metres
IR Control
38kHz carrier frequency for any control protocol
RS232
Supports Tx and Rx only – Any RS232 baud rates up to 115.2 Kb
Ethernet
Adaptive 10/100 M bit, full or half duplex
Power Supply
5V DC
Power Consumption
HDBT-100T: 2.5 W max
HDBT-100R: 5.0 W max
Environmental
Operating Temperature
0 – 35 °C
non condensing
Physical
Dimensions (W x H x D)
115 x 36 x 75 mm
Weight
SY-HDBT-100T: 250 g
SY-HDBT-100R: 270 g
Troubleshooting
Problem
Possible Cause
Power LED is off
Check that correct power supply as provided with the product is used.
Check the PSU connections and ensure that the PSU is switched on.
LINK LED is off
Check that the RJ-45 cable between the transmitter and receiver is
connected with a direct connection and within specified distance.
Check the terminating connectors are wired correctly.
HDMI LED is off
For the transmitter:
Check that the LINK LED is on.
Check that the HDMI source is connected to the HDBT-100T.
Check that the HDMI source is powered.
For the receiver:
Check that the LINK LED is on.
Check that the HDMI display is connected to the HDBT-100R.
Check that the HDMI display is powered.
Check that the HDMI display is set to use its HDMI input.
