MFT21
6
V1.1
GET IN1 EDID y DATA
Get HDMI Input EDID y Data
y = 0 – 26 (as per SET IN1 EDID y)
GET IN2 EDID y DATA
Get VGA Input EDID y Data
y = 0 – 3 (as per SET IN2 EDID y)
GET OUT1 EDID DATA
Get the EDID DATA from the HDMI sink on the HDBaseT output
Note 1: Both these commands must be followed by either the
SET IN1 EDID y
or the
SET IN2
EDID y
command, as appropriate for the respective input and the programmed User EDID memory.
Specification
Items
Description
HDMI Video
Input/output
VESA and SMPTE 480p to 2160p (4K UHD) with 3D. (All resolutions to:
4096x2160p @60Hz 4:2:0 8bit, 3840x2160p @30Hz 4:4:4 8bit)
All PC resolutions to 1920x1200
VGA Video
Input
The following VGA resolutions are supported:
800x600, 1024x768, 1280x768, 1280x800, 1280x1024, 1400x1050, 1600x1200,
1920x1080 and 1920x1200.
HDMI Audio
Input/output
Pass through: All HDMI audio formats including Dolby D (TrueHD) / DTS (HD-
Master Audio) / PCM
Channel count: from 2-8 (2.0 to 7.1)
Sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
HDBaseT output
Max 70m (230feet) of cat6a, @ 1080p. HDMI video, RS232, IR control, PoC
PoC is available only when SY-HDBT-SLIM-70SR is detected on the HDBT output.
De-embedded
Audio out
PCM 2.0 channel from HDBT output, onto 3 pin Phoenix connector.
Stereo L/R, 0.7V Rms – 20Hz-20KHz
Control
RS232 & IR Full function pass though
RS232-CTL port – 57,600 Baud, no Parity, 1 Stop bit
Power Supply
48V DC @ 0.5A max.
Power
Consumption
9.6W with one receiver
Dimensions
108 x 111 x 40mm
Case Materials
Metal chassis
Weight
470g
Using an External Keypad
The MFT21 has an interface for a simple external keypad for controlling the MFT21. The
external keypad consists of a normally open momentary push button and an LED for each input
as shown in the following schematic
: