SY HDBT-662, User Manual, Page: 8 / 12

sy.uk 8 V1.0
RJ45 Wiring
Both connectors must be wired identically.
HDBT will not pass through any Ethernet device, the HDBT port on the SY-MFT21 must be
connected directly to the HDBT port on the SY-HDBT-70SR.
Please do make sure that the Cat6 cable uses 4 pairs of 23AWG solid copper wires. Do not use
inferior copper clad cables as these exhibit high resistances.
Specifications
Items Description
HDMI / DisplayPort Video
Input/output
VESA and SMPTE 480p to 2160p (4K UHD) with 3D. (All resolutions to:
4096x2160p @60Hz 4:2:0 8bit, 3840x2160p @30Hz 4:4:4 8bit
)
All PC resolutions to 1920x1200
VGA Video Input
The following VGA resolutions are supported:
800x600, 1024x768, 1280x768, 1280x800, 1280x1024, 1400x1050,
1600x1200, 1920x1080 and 1920x1200.
HDMI Audio
Input/output
Pass through: All HDMI audio formats including Dolby D (TrueHD) / DTS
(HD-Master Audio) / PCM.
Channel count: from 2-8 (2.0 to 7.1)
Sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and
192 kHz
De-embedded Audio out
PCM 2.0 channel from HDBT output, onto 3 pin Phoenix connector.
Stereo L/R, 0.7V Rms – 20Hz-20KHz
Power Supply 48V DC @ 2.0A max.
Power Consumption
17.3W with one receiver (add 6.5W per additional receiver)
50W max. (all HDBaseT outputs in use)
HDBaseT Outputs
Max 70m (230feet) of cat6a, @ 1080p. HDMI video, RS232, IR control, PoC
PoC is available only when SY-HDBT-SLIM-70SR is detected on the HDBT
output.
Control
RS232 & IR Full function bi-directional pass-though
RS232-CTL port – 57,600 Baud, no Parity, 1 Stop bit
Dimensions 438 x 225 x 44mm (19in x 1U rack mounting)
Case Material Steel chassis
Weight 3 kg