
INsTrUcTIoNs
sxT-scooTErs
4
ASSEMBLY AND SET-UP
Install the scooter
WARNING: Always dis-
connect your scooter from
the charger before cleaning
with liquid.
Note: If your charger does
not look like the one illust-
rated, your unit has been
supplied with an alternate
one. The specifications and
charging procedure would
not change.
The charger has a small
window with one LED or two
LEDs to indicate the charge
status. Refer to the illustra-
tion on the charger unit for
the actual „charging“ and
„charged“ status indications
for your charger model.
Chargers have built-in
overcharge protection to
prevent battery from being
over-charged.
Charger will get warm during
use. This is normal for some
chargers and is no cause
for concern. If your charger
does not get warm during
use, it does not mean that it
is not working properly.
WARNING: Failure to
recharge the battery at least
once a month may result in
a battery that will no longer
accept a charge.
Charging the battery
Your electric scooter may not have a fully charged battery. Therefore its a good idea to
charge the battery prior to use.
• Initial charge time: 12 hours • run time: up tp 40 minutes of continious
ride time
• When the scooter is not in regular use, • average battery life: approx 250 charge /
recharge the battery at least once a month discharge cycles
until normal use is resumed.
Turn
OFF power switch
before charging. Plug the
charger into the charger
port on the electric
scooter
Plug the charger ito a wall
outlet. If the lights on the
charger do not light up,
check the power outlet. If
neccessary try a different
outlet.
1.fold down the
scooters kickstand
2. unfold the
scooter
3. Tighten the knob of
the folding mechanism
4. Put the handle bar
on the scooter
5. Tighten the knob
of the handle bar
Charger
Charger
Port
Charger
Plug