SXT Scooters Board X2, User Manual

Page: 56 / 58

56 56
Maintenance and care
STORAGE
Make sure all screws are tight before each ride. The bearings must be cleaned regularly.
Switch off the board and the controller/remote when not in use. Charge the battery in
well-ventilated rooms.
Do not charge the battery in an area where the board or charger may get wet. Do not
leave the board unattended during charging. Stop using the product or charger if any
wires are damaged. Use only the charger supplied by us. Do not use the on-board battery
to power other devices.
CLEANING THE BATTERY
Never wash the SXT Board X2 with a water hose!
The use of rust inhibitors is strongly recommended.
- Use suitable cleaning and care products and a soft sponge.
- Never use solvents.
- Never direct a jet of water at the following components:
battery, charger, motor, controller/remote.
- After washing, wipe with clean water to remove any cleaning residue.
- Dry with a leather cloth.
ATTENTION:
After cleaning:
Carry out some braking operations in a safe place with extreme caution.
Please keep your SXT Board X2 away from sun and rain.
Check the screws and small parts on your SXT Board X2 regularly.
Do not use alcohol, petrol, acetone or other chemical substances.
Solvent to clean the SXT board, otherwise it could be damaged.
Please pay attention to regular maintenance and inspection of the individual parts.