Telephoning with SwyxPhone L64
How do I transfer a call without Inquiry?
82
If this option is activated, you can connect the two callers to one
another by placing the handset on hook. However, this only works if
you set up the active call yourself. If you did not initiate the active call
(i.e. you received the call), the connection will be terminated by hook
on. The second call will remain on hold.
Example:
Subscriber A is called by C. Then subscriber A begins a second call on
If the option "Transfer on Hookon" is deactivated, the active call will
be ended and the other one will be kept on hold.
10.12 How do I transfer a call without Inquiry?
Your SwyxPhone can be used to accept incoming calls and then to trans-
fer these calls to another subscriber, without waiting for the new sub-
scriber to answer. You can connect two subscribers even though there is
not yet an active connection to one of the subscribers.
This is how you transfer a call without inquiry
You are having a telephone conversation with subscriber A.
1.
Use the arrow buttons to select the option “Call Swap"
2.
Now select the number of the subscriber to whom you would like to
transfer the call (Subscriber B).
3.
Use the arrow buttons to select “Call transfer”.
4.
Feature dialogue
Incognito = off
Configuration
Back
Transf. on Hookon =on
Speed dials
5.
Use the arrow buttons to select the subscriber (here Subscriber A)
whom you want to connect to the other subscriber.
6.
Press the "OK" button.
Your caller (Subscriber A) will hear ringing, and “Call Transfer”
appears on your display. The line on which you initiated the second
call will become free and the first line will change its status from
“Hold” to “Transferring”. Your previous caller (Subscriber A) hears
the phone ring.
7.
The person called (Subscriber B) sees the transferred call on his
display:
The call can be picked up by Subscriber B.
8.
To pick up the call again, activate the corresponding Line button.
10.13 How do I forward a call?
If you are receiving a call you can transfer this call while it is still ringing
to another subscriber or to your Voicemail.
This is how you transfer a call without accepting
1.
Select “Forward call to" with the arrow buttons, and press the "OK"
button.
<Subscriber A>
==> <Forwarder>
In case the caller to whom the call should be transferred is not available,
please remember that the call may be forwarded with some delay (after
more than 20 seconds). If the call is forwarded to Voicemail, the call trans-
fer will automatically be interrupted, the caller is once again put on
“Hold” and will hear music on hold.
