Swyx SwyxPhone L6 series, User Documentation

Page: 78 / 206

Telephoning with SwyxPhone L64 Available Options During a Call
76
2.
Choose the appropriate entry and press the "OK" button.
or
1.
Press the option key in the line of the corresponding status.

The subscriber is then immediately called.
“Redial” function key
You can configure the “Redial” function key on your SwyxPhone or on
the connected Key Module. For further information please refer to chap-
ter 12.4,
Configure function keys , page 113.
The “Redial” button can be used in two ways.
1. Abbreviated Dialing:
Lift the handset and press the “Redial” function key .
The number of the last call will be dialed immediately.
2. The Redial List:
Leave the handset on the hook and press the “Redial” function
key.
A list of the calls you have most recently made will appear.
Select the entry you want with the arrow buttons and confirm
your selection by pressing OK twice, or by picking up the hand-
set.
The subscriber is then immediately called.
10.3 Available Options During a Call
During a phone call you can select the following menu items with the
arrow buttons, and activate the option of your choice with the "OK" but-
ton:
5
Clark, Alexander
Rossi, Mario
Dupont, Marie
10:16
Yesterday
Tuesday
Conversations

Callback request
This function is only available to you during a call to an internal sub-
scriber (see Chapter 11.5,
Callback request , page 95).

Call Transfer
You can transfer a caller directly here. If you have two connections
(one active connection and one on hold), these are directly con-
nected to each other. If you only have one call on one line, you must
input a further number or select one from the phonebook (see
Chapter 10.10, How do I connect two subscribers to one
another? , page 81).

Call Swap
If you select this menu item, the active line is put on "Hold", your
conversation partner will hear music on hold and SwyxPhone will
switch to the next available line (see Chapter 10.9,
How do I switch
between lines (Call Swap)? , page 80).

Disconnect
Disconnects the active connection.

Note
Here you can enter a number and the corresponding name in the
Personal Phonebook during a telephone call (see Chapter 11.4,
Note, page 94).

Secondary call
You can either allow or disable a second call during a call (see Chap-
ter 10.14,
The Secondary Call , page 83).

Conference
If you have one active line and at least one other line on hold, you
can start a conference (see Chapter 11.6, Conference , page 99).
10.4 How do I pick up a call?
If you receive a call, a call is forwarded to you or a call is received for a
group of which you are a member,

the number or the name of the caller will appear on the display,

a ringing sound will be produced,

optical call signaling (LED above the display) will blink.