Swyx SwyxPhone L6 series User Documentation Download Page 41

Page: 41 / 206

Telephoning with SwyxPhone L62

Configuring the Ringing tone

6.17.3 Activating the Handsfree Facility During a Call

You are telephoning and using the handset. The speaker can be either
on or off.

This is how you activate the handsfree facility during a call

Press the Speaker button and keep it pressed while you put the
handset on the hook.

Release the speaker button.



The speaker button LED will light up. The handsfree facility is
activated.

6.17.4 Deactivating the Handsfree Facility During a Call

You are telephoning and using the handsfree facility.

This is how you deactivate the handsfree facility during a call

Simply lift the handset.



The call will be held exclusively via the handset. The Speaker but-
ton will go out.

6.17.5 Activate Handsfree Facility for outgoing call

The handset is on the hook. The line is idle.

You can also switch the microphone on or off via the menu during a call.

If you press the Speaker button during the call or deactivate the speaker in

the shortcut menu, the call will be disconnected.

This is how you activate the handsfree facility for an outgoing call

Press the Speaker button



The handsfree telephone will be activated. You will hear the idle
tone.

Dial the number you want.



The call is initiated. As soon as your call is picked up, you can
carry on the conversation hansdfree.

To carry on the call with the handset, lift the handset.

6.17.6 Activating the Handsfree Facility for an Incoming Call

It is also possible to pick up a call with the Speaker button. If you have

picked up the call in this manner, the handsfree function is activated.
You then have the call using the handsfree facility.

6.17.7 Regulating the Volume

You can use the “+” and “-” button to adjust the volume

of the speaker and the handset, depending on which one

is currently active. The setting will stay at this level for the

next call.
If you press the volume control while the speaker is off during a call, the

volume of the handset speaker will change.

6.18

Configuring the Ringing tone

The "+" or "-" buttons can be used to regulate the volume of the ringing

tone. If you press the buttons while your SwyxPhone is ringing, the vol-
ume is adjusted.
For further information please refer to chapter 8.2.1,

Ring tones

, page 56.

If you press the volume control while the telephone is inactive, the volume
of the ringing tone is adjusted.

Summary of Contents for SwyxPhone L6 series















































































































































































































Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands

Swyx SwyxPhone L6 series, User Documentation

Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands