Swyx SwyxPhone L6 series User Documentation Download Page 169 | Manualshive

Page: 169 / 206

background image

SwyxPhone L66 Configuration

Lists

167

2.

Select "Caller List (XX)" and press the "OK" button.



The following will appear:

3.

Choose the appropriate entry and press the "OK" button.



The following will appear:

• If you select "Dialing" and press OK, the subscriber is called

directly.

• “Edit and dial” can be used to edit a telephone number before

dialing. When you confirm your changes with OK, the number
will be dialed immediately.

• “Save into phonebook” can be used to save the caller’s name and

number in your Personal Phonebook. If you confirm this option
with OK, the number will appear and you can then add the name.
If a name already exists, the name will be provided for possible

Feature dialogue

Callers XX/YY <Date>

Subscriber

<Time> <Subscriber>

<Time> <Subscriber>

<Time> <Subscriber>

Clear list

Back

Feature dialogue

<Number/Name>

<Date> <Time>

=Call (not) answered

Dialing

Edit and dial

Save into phonebook

Delete entry

changes.

• You can remove this entry from the list with "Delete entry".

This is how you delete the Caller List

If the list is no longer up-to-date, it can be deleted at any time.

1.

Use the arrow buttons to select"Main Menu" and press the "OK"
button.

2.

Select "Caller List (XX)" and press the "OK" button.

3.

Scroll with the arrow button “Down” to the end of the list.



The following will appear:

4.

Choose "Clear List" and press the "OK" button.



The entire list will be deleted.

16.3.4 Redial list

All dialing procedures are automatically saved in the Redial List. The

entries begin with the most recently saved dialing procedure. 20 entries
will be saved in the Redial List as default setting. The length of the list can

be changed with SwyxIt!. For further information, please refer to the

SwyxIt! documentation.

Feature dialogue

Caller (XX/YY) <Date>

<Subscriber>

<Time> <Subscriber>

<Time> <Subscriber>

<Time> <Subscriber>

Clear list

Back

If the handset is off the hook or if the Speaker button is activated when

you press the “Redial” button, the last number dialed will be called again.

«
...
167
168
169
170
171
...
»

Summary of Contents for SwyxPhone L6 series















































































































































































































Reviews:

No comments

Related manuals for SwyxPhone L6 series

Brand: Iget Pages: 54

Brand: Obihai Pages: 12

Brand: Obihai Pages: 220

Brand: Alcatel Pages: 4

Brand: Archos Pages: 40

STORM 9500 - STORM 9530 SMARTPHONE

Brand: Blackberry Pages: 36

Brand: HANNspree Pages: 75

Brand: Htek Pages: 2

Brand: HTC Pages: 139

Brand: Geemarc Pages: 47

Brand: Geemarc Pages: 72

Brand: Zte Pages: 36

Brand: Lava Pages: 20

Brand: Zte Pages: 74

Brand: Samsung Pages: 65

Galaxy S20 FE 5G

Brand: Samsung Pages: 174

Galaxy S SGH-i897 Captivate

Brand: Samsung Pages: 209

Galaxy S20 Ultra

Brand: Samsung Pages: 252

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands