Swyx SwyxPhone L6 series User Documentation Download Page 114

Page: 114 / 206

SwyxPhone L64 Configuration

Lists

112

Choose the appropriate entry and press the "OK" button.



The following will appear:

• If you select "Dialing" and press OK, the number is dialed at

once.

• “Edit and dial” can be used to edit a telephone number before

dialing.

• “Save into phonebook” can be used to save the caller’s name and

number in your Personal Phonebook. If you confirm this option
with OK, the number will appear and you can then add the name.
If a name already exists, the name will be provided for possible
changes.

• You can remove this entry from the list with "Delete entry".

This is how you delete the Redial List

If the Redial List is no longer up-to-date, it can be deleted at any time.

Select “Main menu" with the arrow buttons, and press the "OK"
button.

Feature dialogue

Redial XX/YY <Date>

Clear list

Back

Feature dialogue

Edit and dial

<Number dialed/

Subscriber>

Dial

Save into phonebook

Delete entry

Choose "Lists" and press the "OK" button.

Choose "Redial List" and press the "OK" button.



The Redial List opens up.

Scroll with the arrow button "Down“ to the end of the list.



The following will appear:

Choose "Clear List" and press the "OK" button.
The entire list will be deleted.
If you reopen the Redial List, the message “No entry” will appear.

12.3.5 Lists for Callback Requests, My Callback Requests and

Missed Callbacks

In the "My Callback Requests" list you will find all callbacks that you

have requested.
In the "Callback Requests" list you will find all callbacks that have been

directed to you.

Feature dialogue

Callers XX/YY <Date>

<Number dialed/

Subscriber>

Clear list

Back

Feature dialogue

Callback requests (XX)

Lists

My callback requests

Redial list

Back

Summary of Contents for SwyxPhone L6 series















































































































































































































Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands

Swyx SwyxPhone L6 series, User Documentation

Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands