
SwyxIt! Handset P280
5
1.3
SwyxIt! Handset P280 Functions in Detail
The information below describes the behavior of the SwyxIt! Handset
P280 in detail.
1.3.1
Signaling via the LED at the Top
Handset is on hook and LED flashes
You are receiving an incoming call. As soon as you answer it, the LED will
go out.
1.3.2
"Speaker" Button
Situation
Press the
following button:
Result
The handset is on the
hook and the phone
rings.
Speaker
"Handsfree" mode is
activated. The LED on the
"Speaker" button lights up.
The device speaker and
room microphone of the
handsfree equipment
assigned to this audio
mode are used. Pressing
the "Speaker" button again
will end the call.
The handset is on the
hook.
Speaker
The LED on the "Speaker"
button lights up. You hear
the idle tone through the
device speaker. You are free
to dial a number. The
resulting call will take place
in "Handsfree" mode.
If "Handsfree" audio mode has been deactivated within the settings, calls
can only be made via the handset or a connected headset.
The handset is off the
hook and you are in
the middle of a call.
Speaker
The device speaker on the
SwyxIt! Handset P280 is
activated. The LED on the
"Speaker" button lights up.
If you want to speak, you
must continue to use the
microphone in the handset.
Pressing the "Speaker"
button again deactivates
the device speaker and the
LED goes out.
The handset is on the
hook and you are in
the middle of a call via
a connected headset.
Speaker
The device speaker on the
SwyxIt! Handset P280 is
activated. The LED on the
"Speaker" button lights up.
The handset and headset
speakers are used for voice
output. If you want to
speak, you must continue
to use the microphone in
the headset. Pressing the
"Speaker" button again
deactivates the handset
speaker and the LED goes
out.
The handset is on the
hook and you are in
the middle of a call in
"Handsfree" mode.
Speaker
The LED on the "Speaker"
button goes out and the call
is terminated.
Situation
Press the
following button:
Result