manualshive.com logo in svg

SWsoft SWsoft OpenVZ, User Manual, Page: 50 / 119

Share
Download
SWsoft SWsoft OpenVZ User Manual Download Page 50

 

Managing Resources 

50 

 

Setting Up Per-VPS Disk Quota Parameters 

Three parameters determine how much disk space and inodes a Virtual Private Server can use. 
These parameters are specified in the Virtual Private Server configuration file: 

DISKSPACE

Total size of disk space that can be consumed by the Virtual Private Server in 1-
Kb blocks. When the space used by the Virtual Private Server hits the soft limit, 
the VPS can allocate additional disk space up to the hard limit during the grace 
period specified by the 

QUOTATIME

 parameter. 

DISKINODES

Total number of disk inodes (files, directories, and symbolic links) the Virtual 
Private Server can allocate. When the number of inodes used by the Virtual 
Private Server hits the soft limit, the VPS can create additional file entries up to 
the hard limit during the grace period specified by the 

QUOTATIME

 parameter. 

QUOTATIME

The grace period of the disk quota specified in seconds. The Virtual Private 
Server is allowed to temporarily exceed the soft limit values for the disk space 
and disk inodes quotas for no more than the period specified by this parameter. 

The first two parameters have both soft and hard limits (or, simply, barriers and limits). The 
hard limit is the limit that cannot be exceeded under any circumstances. The soft limit can be 
exceeded up to the hard limit, but as soon as the grace period expires, the additional disk space 
or inodes allocations will fail. Barriers and limits are separated by colons (“:”) in Virtual Private 
Server configuration files and in the command line. 

The following session sets the disk space available to Virtual Private Server 101 to 
approximately 1Gb and allows the VPS to allocate up to 90,000 inodes. The grace period for the 
quotas is set to ten minutes: 

# vzctl set 101 --diskspace 1000000:1100000 --save 

Saved parameters for VPS 101 

# vzctl set 101 --diskinodes 90000:91000 --save 

Saved parameters for VPS 101 

# vzctl set 101 --quotatime 600 --save 

Saved parameters for VPS 101 

# vzctl exec 101 df 

Filesystem           1k-blocks      Used Available Use% Mounted on 
simfs                  1000000    747066    252934  75% / 

# vzctl exec 101 stat -f / 

  File: "/" 
    ID: 0        Namelen: 255    Type: ext2/ext3 
Blocks: Total: 1000000   Free: 252934   Available: 252934   Size: 1024 
Inodes: Total: 90000     Free: 9594 

It is possible to change the first-level disk quota parameters for a running Virtual Private Server. 
The changes will take effect immediately. If you do not want your changes to persist till the next 
Virtual Private Server startup, do not use the 

–-save

 switch. 

 

 

Summary of Contents for SWsoft OpenVZ
























































































































Reviews:

No comments