19
1.2.5 Operation modus
Choice of switching contact:
AST Open current
RST Closed current
With
and
you make a choice according to
the display. With C you quit the menu point without any change and with
the
input is accepted and you quit the menu level.
1.3 Alarm 2
According to alarm 1
1.4
Calibration
Only necessary in case of disturbing
nonlinearity (see right chart).
The base points of the ideal characteristic curve are entered and calibrated down to
the actual characteristic curve. The following adjustment is done on the sensor the
signal output is linear.
With
and
you make a choice according to
the display. With C you quit the menu point
without any change and with
the input is ac-
cepted and you arrive 1 menu point lower to make
your settings.
Alarm 1
Operation modus
AST
C
4.Calibration
4.1.Filter
0.1s
4.2.Base point
2
C
4.3.Fact.1 1.00
4.4.Fact.2 0.00
Summary of Contents for M-Sens 2
Page 1: ...1 ...
