22
• CALIFORNIA BLONDE OWNER’S MANUAL
FRONT PANEL FEATURES
FRONT PANEL FEATURES
• Instrument Input Jack
• Stereo Input Jack
• Tuner Out Jack
• Balanced Mic Input Jack
• Gain Controls with LED Overload Indicator and Pull Phase
• Aural Enhancer Control (Channel 1)
• Bass Controls
• Mid Range Level Controls
• Treble Controls
• Effects Blend Controls
• Reverb Control
• Master Volume Control
• Power On/Off Switch
REAR PANEL FEATURES
REAR PANEL FEATURES
• Line Fuse: 3A slo-blo
• A/C Power Cord Receptacle
• Stereo Headphones Jack
• Speaker On/Off Switch
• Effects Send Jacks
• Effects Return Jacks
• Balanced Line Out
• Line Out Jacks (Channel 1 or 2)
• Post-Reverb Return Jack
• Reverb Footswitch Jack
CROSSOVER PANEL FEATURES
CROSSOVER PANEL FEATURES
• Tweeter Attenuator Control
• Extension Speaker Out Jacks (Speakon
®
and 1/4")
GETTING STARTED
GETTING STARTED
Remove the AC cable from the accessory pack and connect it from the amplifier to a standard wall outlet. Make
sure that the
Gain
and
Master Volume
controls are set to the minimum position (fully counter-clockwise). Locate
the power switch on the right side of the front of the unit and turn on the amplifier. Upon powering up, don’t be
surprised if you hear a small pop. This is absolutely normal.
Plug your instrument into the desired input jack (refer to “Front Panel Features” for greater detail). Turn your
instrument’s volume up to at least 75% of maximum and slowly adjust the gain control. Once you begin to play
your instrument and you see the yellow light over the gain control illuminate, back off the gain a bit. Now turn up
the
Master Volume
and you should hear the sound of your instrument amplified through the California Blonde.
For more detailed information, please read the entire manual carefully so that you can fully realize the California
Blonde’s potential.
