12-STACK
12-STACK
SPECIFICATIONS
Description
: 4x12 bass speaker enclosure
Power Handling
: 800 watts RMS
Impedance
: 8 Ohms
Speaker Complement
: Four custom 12-inch SWR drivers
Heavy-Duty Inset Metal Handles, Front Slot Port,
Removable Casters
Dimensions
: 26.5" W x 30.5" H x 16.5 D
Weight
: 102 lbs.
CONNECTION AND OPERATION
The 12-Stack can be connected to any musical instrument amplifier that is capable of driving an 8
ohm load. To connect your amplifier to the 12-Stack, run a high quality speaker cable (18 gauge or
heavier) from your amplifier's speaker output to one of the designated speaker inputs (Speakon or 1/4")
on the 12-Stack's input panel.
POWER HANDLING
The power output rating for any amplifier connected to the 12-Stack should not exceed the
enclosure's 800 watt RMS power handling capacity. Please be aware that exceeding the 12-Stack's
power handling capacity can void the SWR warranty if any damage occurs to your loudspeakers due to
overpowering.
FULL-RANGE INPUT AND OUTPUT JACKS
The 12-Stack features four full range input/output jacks (two standard 1/4" and two Speakon) wired in
parallel. If you are running two speaker enclosures in parallel, connect the speaker cable from your
amplifier to either jack marked "IN," and a second cable from either jack labeled "OUT" to the input of
the second speaker enclosure.
BASS SPEAKER ENCLOSURES OWNER’S MANUAL • 17
