background image

STEALTH DIGI-ARC 200LT

9

 

6.2  Welding Table

 

 

Note: The following table applies to low-carbon steel. For other materials, please refer 

 

 

to related information.

 

 

 

Electrode diameter 

Recommended welding 

Recommended welding 

 

 

 

(mm) 

current (A) 

voltage (V)

    

1.0 

20~60 

20.8~22.4

    

1.6 

44~84 

21.76~23.36

    

2.0 

60~100 

22.4~24

    

2.5 

80~120 

23.2~24.8

    

3.2 

108~148 

23.32~24.92

  

    

4.0 

140~180 

24.6~27.2

    

5.0 

160~200 

26.4~28

7  OPERATION NOTICES

 

7.1 Installation

   7.1.1  Welding environmental temperature should be between –10ºC to 40ºC.
   7.1.2  Welding should be completed in relatively dry environments with air humidity of 

 

 

      not more than 90%.

   7.1.3  Avoid environments containing dust or corrosive gases.
   7.1.4  Avoid sunlight or rain. Do not allow water or rain water to infiltrated the welding 

 

 

     machine.

   7.1.5  Avoid a strong air flow environment when gas welding.

 

7.2 Safety

 

 

This welding machine has been installed with a over-voltage, over-current and 

 

 

over-temperature protection circuit. When the grid voltage, output current and internal 

 

 

temperatures exceed the set temperature, the welding machine will automatically 

 

 

cease working. Excessive use will result in welding damage, so please note:

   7.2.1  Ensure good ventilation

 

 

      The Digi-Arc 200LT is equipped with cooling fans. Before use, please check 

 

 

      the vents are clear and the distance surrounding welding is not be less than 0.3 

 

 

     metres. 

   7.2.2  Prevent overload

 

 

      The welder should ensure that the duty cycle current is kept within the standard 

 

 

      range (see technical data table). Any current overload will shorten the life of 

 

 

      the machine welding machine and may even ignite.

Summary of Contents for 9023H













Reviews: