SWorkz S14-3, Instruction Manual, Page: 10 / 36

10
6
Share with step no.4
5
BAG
E
Apply a light coat of grease to
the crown gear before assembly
the gear box.
334028
116016
334024
220019
220019
334001
110616
104011
334003
108001
M3x12mm FH/ST HEX Screw x4
116016
Ball Bearing 5x11x4mm x2
104011
M4x4mm Set Screw (Flat Bottom) x1
Pro Tip:
Before installing the M4x4 set screw
(104011), remember to clean the set screw
and center driver joint (334003) first.
Then apply TLC on the set screw.
108001
108001
334028
S14-3 Pinion Gear Stopper 5x7x4mm x2
101024
10x12x0.2mm S104 Shim x4
101023
10x12x0.1mm S104 Shim x2
Note:
SHIM
Please use 10x12x0.1mm (101023) or
10x12x0.2mm (101024) shims to adjust the
play between the crown gear and pinion gear.
220022
220022
200341
330315
330315
Sway Bar Ball Stud x2
Left
Right
You can use a body reamer to
drill holes on the lower arms (the
round note positions), that will
change the stiffness/flex for the
arms. The more holes gives the
arms more flex.