Preparing the Walkie−Talkies for Use
62
Energy−save mode
Your walkie−talkies are provided with an energy−save mode to in-
crease the service life of the batteries. If no buttons on the walkie−
talkies are pressed for a period of 4 seconds, energy−save mode is
activated. Energy−save mode is deactivated as soon as you press a
button or a signal is received.
Attaching the belt clips
Slide the belt clip in the guide from the top until it audibly snaps into
place. To detach the belt clip, prize the fastening tab up a little with
your fingernail and slide the belt clip upwards.
Setting the time
After having inserted the battery pack, proceed as follows to set the
time on the walkie−talkies.
3 sec
Activate programming mode
+
or
,
,
Set the hour and confirm it
+
or
,
,
Set the minute and confirm it
The set time is lost when the battery pack is removed. You
must set the time again.