Operating the Walkie−Talkies
46
Confirmation signal (Roger beep)
The confirmation signal is issued on releasing the
button.
This signals to the caller that you have ended transmission.
Selecting a channel
Activate Programming mode
+
or
,
Select a channel
or
Confirm the selection
Channel
Frequency (MHz)
Channel
Frequency (MHz)
1
446.00625
5
446.05625
2
446.01875
6
446.06875
3
446.03125
7
446.08125
4
446.04375
8
446.09375
Searching for a channel
Signals are searched for in the eight channels in a continuous
cycle.
SC
appears in the display. If an active channel is detected,
the channel scan stops. Press the
button to enable radio
communication.
Starting channel scanning
and
+
Start the channel search
Resuming channel scanning
+
or
,
Resume the channel search
Stopping channel search
or
Stop the channel search
Transmitting the ringing tone
The ringing tones indicate to other subscribers that you want to talk
to them. A condition for this is that the other subscribers are using
the same channel.
Transmit the ringing tone
