- Operation -
57
In order to be able to speak between two radios,
both units must be set to the same channel.
1.
Press the
MODE
button once. The
CHAN
indicator will
flash in the display.
2.
Select the required channel using the
and
buttons.
3.
Confirm the selection with the talk button on the left-
hand side.
3.4.1 Changing the call code (CTCSS)
Normally, all calls on the selected channel are sent to all
radios that are in receiving range. You may therefore also
hear calls that are not intended for you when other people
are using radios on the same channel in the vicinity. In order
to prevent this, it is possible to define a call code. Check
between yourselves which code has been selected.
1.
Press the
MODE
button twice. The
CODE
indicator
and the current call code will flash in the display.
2.
A new code between 01 and 38 can now be selected
using the
and
buttons. If the code -- is
selected, all calls will be made on the selected
channel.
3.
Confirm the selection with the talk button on the left-
hand side.