Putting the Telephone into Operation
62
Inserting the batteries
Insert the batteries in the open
battery compartment.
Only use batteries of the type
AA 1.5 V. Pay attention to the
correct polarity. Close the
battery compartment cover.
Insertion of batteries is not absolutely essential. The telephone
can be operated with or without batteries. The full range of tele-
phone functions can only be used when batteries or the power
adapter plug are fitted. Pay attention that the telephone is not con-
nected to the telephone line socket and/or mains power connec-
tion when the batteries are being inserted or replaced.
When the batteries are empty, the
icon appears in the display.
Replace the batteries.
Setting the time and date
The time and date are set via the menu. Refer to Page 68 for the se-
quence of menu option selections necessary.
Private branch exchanges
The information on Page 67 explains how to install your telephone in a pri-
vate branch exchange.
Wall installation
Feed the guide tabs (1) on the wall−mounting bracket (2) in the slots (3) on
the underside of the telephone. Slide the wall−mounting bracket 10 mm
upwards until it audibly locks into place. Drill a hole and insert a screw
leaving about 5 mm of the screw projecting from the wall. Guide the
mounting hole (4) in the mounting bracket (2) over the screw and slide the
telephone downwards.
Caution:
Ensure there are no electrical cables, water pipes etc.
in the wall where the hole is drilled.
1
2
3
3
4
Turn the hook (5) in the receiver cradle so that the receiver can be placed
on−hook.
5
5
5
5
5
