switel DPF951, Operating Instructions Manual

Page: 80 / 100

1
VMWI: V isual M essage W aiting I ndication = Visual indicator that new
messages have been recorded.
102
103
104
Preliminary Information
80
Icons and texts in the handset display
Icon Description
On: Indicates the battery charge status.
Flashing: The batteries must be charged.
Run−through segments: The batteries are being
charged;
Page 78.
1
Internally assigned handset number; Page 91.
2 Oct 10:50
Display of date and time; Page 85.
An external call is currently being made.
An internal call is currently being made.
An external call has been received; Page 86.
On: Numbers are in the call list
Flashing: New numbers have been recorded in the
call list;
Page 90.
< > Further information is available by scrolling left, right,
up or down. Press the corresponding navigation
button to display it.
The ringing tone has been switched off; Page 87.
The handsfree facility is activated; Page 87.
The key lock function is activated; Page 87.
Answering machine provided in the telephone
network.
VMWI
1
− Supplementary service offered by
telephone network providers; Page 82.
An alarm time has been programmed.
On: The connection to the base station is good.
Flashing: The connection to the base station is
interrupted. Move nearer to the base station.
Standby mode
All descriptions in this operating manual assume that the handset is in
Standby mode. Press the
button, several times if necessary, to
activate Standby mode.
Energy−save mode
When the handset has been in Standby mode for some time, it
automatically switches to energy−save mode. The display no longer
lights up.
Navigation buttons
The softkeys (2) and (6) are assigned different functions in the different
menus. The function buttons are always referred to in this manual
according to the texts directly above them in the display.
1
2
3
4
5
6
Button In Standby mode In a menu
1 − Open the redialling list
− Scroll
− Change the settings
2
− Open the phone book − Open the menu displayed
− Confirm the programming
and saving processes
3 − Move cursor in the entries
4
− Open the call list
− Scroll
− Change the settings
− Delete characters in
entries
5 − Initiate internal calls − Move cursor in the entries
6 − Open the main menu − Skip one level back
Navigating in the menu