2
4
Your phone’s base station is supplied with an energy−efficient switching power sup-
ply IW506E (Input 100~240 V
AC
, Output 6 V
DC
, 450 mA). The adaptor input power
without load is approx. 0.2 W. The average efficiency is approx. 55 %.
The electrical consumption of the base is:
− in operation mode (idle/call): approx. 0.63 W / approx. 0.87 W
− during charging of the handset: approx. 1.2 W
Charging the battery pack
Before the handset is used for the first time, insert it in the base/charging station
for
at least
15 hours.
When the handset is inserted in the base/charging station properly, you will hear an acoustic
confirmation signal and the charge control lamp lights up. The handset warms up during the
charging process. This is normal and does not represent a risk. Do not charge the handset with
charging units from other manufacturers.
The current
battery charge status
is indicated in the display:
Full
Half empty
Low
Empty
Setting the display language
Select a language (cf. Menu Structure"):
m
> PERS. EINST > SPRACHE >... (
m
> Personal Set > Language >...)
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 12 for the sequence of menu option
selections.
Auto answer / Auto hang−up
When this feature is enabled, the telephone will automatically take a call when the handset is
removed from the base station and automatically hang up when it is put back on the base sta-
tion. Use the menu to activate or deactivate these functions. Refer to Page 12 for the se-
quence of menu option selections.
Private branch exchanges
The information on Page 13 explains how to install your telephone in a private branch ex-
change.
Low−radiation (ECO mode) (single pack only)
The level of radiation is considerably lower than that of standard DECT cordless
telephones when the handset is in Standby and placed in the base station.
Radiation is also reduced in talk mode (depending on the distance between the
handset and base station).
