switel DFT9971, Operating Instructions Manual

Page: 13 / 21

20
13
Advanced Set
Recall Time Short (100 ms) / Medium (270 ms) / Long (600 ms)
Registration Enter PIN
1
Unregister Enter PIN Unregister 1 2 3 4
Change PIN
Enter PIN /
Enter New PIN
Enter New PIN
Confirm PIN
Reset Enter PIN Confirm?
Answ. Machine
Play
Record Memo
Answ. Mode Answ. & Rec. Predefined / Personalised
Answer Only
Predefined / Personalised
Ans. On/Off Off/On
Settings Ring Delay Rings 3−8 / Toll Saver
Remote access Off/On
HS Screening Off/On
9 PABX / Supplementary Services
R−functions on private branch exchanges
If your telephone is connected to a private branch exchange, functions such as call forwarding
or automatic call back can be used via the
R−functions . Refer to the operating manual pro-
vided with your private branch exchange as to which Flash time must be set in order to use
these functions. The sales outlet where you purchased the exchange can provide information
as to whether the telephone will work properly with the exchange. The Flash time is set using
the menu. Refer to Page 13 for the sequence of menu option selections.
R−functions and supplementary services
Your telephone supports supplementary services provided by your telephone network provider,
such as brokering or conference calls. These supplementary services can be used by imple-
menting the
R−functions . Please contact your telephone network provider regarding which
Flash time must be set to use the supplementary services. Also contact your telephone net-
work provider with regard to enabling supplementary services. The Flash time is set using the
menu. Refer to Page 13 for the sequence of menu option selections.
Dialling pause
When using private branch exchanges, it is necessary to dial an access code to obtain the dial-
ling tone for an outside line. When using some older private branch exchanges, it takes a little
time before the dialling tone becomes audible. In the case of such private branch exchanges, a
dialling pause can be inserted after the number for an outside line in order to continue dialling
directly without having to wait for the dialling tone.
3 sec.
"
Insert a dialling pause
The actual phone number is dialled a certain time after the number for an outside line.
The dialling pause can also be entered with the phone numbers in the phone book.
1
The PIN code is set to 0000" at the factory.