switel DFT 897 series, Operating Instructions Manual, Page: 171 / 196

25
GB
Setting the telephone
Direct call
Menu Press the Menu softkey.
/ Select Settings and press OK .
/ Select HS settings and press OK .
/ Select Direct call and press OK .
Enter the System PIN (in delivery state 0 0 0 0) and press
OK .
/ Select one of the following options and confirm with OK :
Direct call Switch the direct call on or off . After having switched it to “on“
you will be asked to enter a telephone number.
After pressing
Option you can select an entry from the tele-
phone book, the call list or the redial list.
If direct call is activated pressing any key (without the
Option
softkey) will dial the programmed telephone number.
☞
To deactivate the direct call press Option , enter the PIN and press OK .
Then you can set the direct call to “off“.
Select a base station
Menu Press the Menu softkey.
/ Select Settings and press OK .
/ Select HS settings and press OK .
/ Select Select base and press OK .
/ Select a base and press OK .
☞
Only base stations are shown your handset is already registered to.
Setting the display
Menu Press the Menu softkey.
/ Select Settings and press OK .
/ Select HS settings and press OK .
/ Select Display and press OK .
DFT897x-GB_V1_0 03.10.2008 8:44 Uhr Seite 25