switel DFT 807 Series, Operating Instructions Manual

Page: 100 / 108

92
SMS
100
10 SMS
Conditions for using SMS
The CLIP
1
feature must be available for your telephone connection. Con-
tact your telephone network provider to ensure this feature is enabled on
your telephone connection. To use the
SMS
2
service, your telephone net-
work provider must enable it.
A text cannot be sent from every private branch exchange extension.
If you want to send SMS text messages from a private branch ex-
change extension, it is necessary to store the number for an out-
side line for your PBX in the handset preceding the Service Cen-
ter number.
Sending SMS messages is not available for Call−by−Call connections
at present.
Charges are made for sending SMS texts.
If the recipient in the conventional telephone network does not use an
SMS service or his telephone is not equipped to handle SMS
messages, the SMS is automatically converted to a voice message.
Costs are charged by your telephone network provider.
SMS Service Center
SMS messages are distributed via a Service Center. If you want to send
SMS text messages, you must program a service center number in your
handset
Page 96. Please contact the provider of your choice for the ne-
cessary service center call numbers and the procedure for enabling the
SMS service.
Your telephone has already been prepared to send SMS text
messages. Service Center numbers are already programmed in
the handset. Activate the required Service Center in the SMS
menu
Page 96.
Service Center 1 Service Center 2
Swisscom: 0622100000 Cablecom: 0435375370
Service Center 3 Service Center 4
Empty Empty
Entering text
The digit keys are also labelled with letters for the entry of the respective
letters. Letters, digits and special characters are entered by pressing the
relevant key the respective number of times.
&
,
'
or
%
Enter special character
Switch between entering upper and
lower case and digits
Del Delete the last character entered
2 sec Del Delete the entire text
SMS alert signal (alarm)
An acoustic signal is issued when a new SMS text message is received.
You can activate or deactivate this signal. Activating/Deactivating the
alarm signal,
Page 96.
1
CLIP: C alling L ine I dentification P resentation
2
SMS: S hort M essage S ervice