66
Caller number display (CLIP
10
)
The caller number display (CLIP) is a supplementary service offered by your
telephone network provider. Contact your network provider for further information.
If this function is available with your telephone line, the number of the caller appears in the
display when the phone rings. If the caller has suppressed the transmission of their phone
number, a corresponding message appears; the call number does not appear in the display
and, as a result, is not stored in the calls list.
11 Extending the Telephone System
The international standard
GAP
11
standard regulates the compatibility of handsets and base
stations from different manufacturers. As a result, it is possible to integrate SWITEL devices
and devices from other manufacturers together in one telephone system. It is possible,
however, that some functions are not available.
Multiple handsets
Up to 5 handsets can be registered on the base station.
Registering handsets
Before starting to register a handset, switch the base station to Registration mode.
5 sec.
Activate Registration mode
Then register the handset;
Page 65 (REGISTER). The currently valid PIN code is used for
registration purposes;
The handset is automatically assigned an internal call number following registration.
To register handsets from other manufacturers, please refer to the operating
manual supplied with them.
Deregistering handsets
Each handset can deregister itself and other handsets registered on the base
station. After deregistration, the message UNREGISTERED appears in the display
of the deregistered handset.
Handsets are deregistered via the menu. Refer to Page 65 for the location of UNREGISTER in
the menu.
10
CLIP:
C
alling
L
ine
I
dentification
P
resentation = Display number of the caller.
11
GAP: G
eneric
A
ccess
P
rofile = Standard for the interoperation of handsets and base sta-
tions from different manufacturers.
Summary of Contents for DE34 Series
Page 70: ...70 Notes...
Page 71: ...71 Notes...
