− Navigating in the Main Menu −
84
6
Navigating in the Main Menu
6.1
Navigating in the menu
All the functions can be accessed via the various menus. Refer to the menu structure in Chapter
7 to find how to access the respective functions.
1. Open the required menu or phone book using the relevant button.
2. Press
or
to select the required submenu.
3. Press the
button to open the submenu.
4. Press
or
to select the required function.
5. Press the
button to open the function.
6. Press
or
to select the setting required.
7. Enter digits or letters using the relevant digit keys.
8. Press the
button to confirm the input.
9. Press the
button to move one menu level back.
Every process is automatically cancelled if there is no input within 20 seconds.
6.2
Acoustic signals
To simplify operating the telephone, it is equipped with various confirmation, notification, warning
and others acoustic signals. Some of them can be activated or deactivated as required. These
include:
S
Key beep
: A short tone is issued each time a button on the handset is pressed.
S
Low battery" warning signal
: If the battery capacity is too low, a warning signal is
issued to remind you to charge the handset.
S
Range warning signal
: This acoustic warning signal is issued when the handset is
moved too far from the base station.
The way to switch the signals on and off is described in the menu structure in Section 7.4.
Other acoustic signals simplify navigating in the menu. They cannot be deactivated. The most im-
portant of these are:
S
Confirmation signal
: Two short, ascending acoustic signals are issued when in-
put is completed successfully.
S
Notification signal
: A longer, higher acoustic signal is issued on reaching the
end of a menu after scrolling up or down, indicating there are no further selection op-
tions.
6.3
Example
Using the example of Writing an SMS", this section explains how to navigate in the main menu
and submenus and complete entries. Proceed as in this example for all the settings.
Open the main menu
or
,
Select the
SMS
function and confirm
or
=!3
,
Select the function and confirm
(Menu
SMS / WRITE
)
0"
,
Confirm the request for input
,
Enter a message and confirm
2 !
,
Confirm the request for input
,
Enter a phone number and confirm
:
Send process is started
