- Special functions -
76
7.3
Setting the ring tones on the base station (ring melodies)
The base station can also respond with three different ringing tones when a call comes through.
1.
Press the menu button
.
2.
Select
the
SETUP
menu with
and
and confirm with
.
3.
Select
the
BASE MELODY
function with
and
and confirm with
.
4.
Select the required melody with
and
and confirm with
.
5.
Now select further menu functions or exit the menu by pressing and holding the
button.
7.4
Ring tone volume on the base station
The volume of the ring tone on the base station can be adjusted in three steps. If at any time you do not want to be
disturbed, you can also turn the ring tone off altogether.
1.
Press the menu button
.
2.
Select
the
SETUP
menu with
and
and confirm with
.
3.
Select
the
BASE VOLUME
function with
and
and confirm with
.
4.
Select
the required volume using
and
or switch the ring tone off with
VOLUME OFF
and confirm with
.
5.
Now select further menu functions or exit the menu by pressing and holding the
button.
7.5
Accepting calls automatically
Incoming calls are accepted automatically when you lift the receiver from the base station. If you only want calls to be
accepted by means of the
button, you can deactivate the automatic acceptance facility.
1.
Press the menu button
.
2.
Select
the
HANDSET
menu with
and
and confirm with
.
3.
Select
the
AUTO ANSWER
function with
and
and confirm with
.
4.
Select
ON
or
OFF
with
and
and confirm with
.
5.
Now select further menu functions or exit the menu by pressing and holding the
button.
7.6
Tone (TD) or pulse (PD) dialling
This feature enables you to use your telephone both on analogue exchanges (PD) and on the new digital exchanges
(TD). The factory setting is TONE dialling.
1.
Press the menu button
.
2.
Select
the
SETUP
menu with
and
and confirm with
.
3.
Select
the
DIAL MODE
function with
and
and confirm with
.
4.
Select the required dialling mode with
and
and confirm with
.
5.
Now select further menu functions or exit the menu by pressing and holding the
button.
7.7
Changing display names
In normal operation, the message "D6025" appears in the display. If you have logged on several handsets to one
base station, it can be useful to give each handset its own name. The number after the name shows with which
number the handset can be called internally.
Summary of Contents for D6025
Page 84: ...www switel com...
