SwitchDoc Labs SkyWeather WXLink, Assembly And Testing Manual

Page: 26 / 31

Page 24
Version 1.1 May 2019
Open a command line terminal window.
cd SDL_Pi_SkyWeather
sudo pigpiod
sudo python SkyWeather.py
Make sure you have the Grove LoRa Transciever plugged into your Pi2Grove Board. The SkyWeather System
will automatically configure itself.
You should see something like this:
pi@switchdoclabs:~/SDL_Pi_SkyWeather $ sudo python SkyWeather.py
(15.177600000000002, 7, 2)
()
('Pi Camera Revision', u'ov5647')
('HW-Version: ', 18)
('after bme680', True)
as3935 start
as3935 present at 0x02
SkyWeather Weather Station Version 034 - SwitchDoc Labs
Program Started at:2019-05-05 16:13:46
----------------------
I2C Mux - TCA9545:
Present
BME680: Present
BMP280: Not Present
SkyCam: Present
DS3231: Not Present
HDC1080: Not Present
AM2315: Not Present
ADS1015: Not Present
ADS1115: Present
AS3935: Present
OLED: Not Present
SunAirPlus: Not Present
SI1145 Sun Sensor: Not Present
TSL2591 Sun Sensor: Present
DustSensor: Present
WXLink: Present
UseBlynk:
Present
UseMySQL: Present
Check WLAN: Present
WeatherUnderground: Not Present
UseWeatherStem: Present
----------------------
sendmail exception raised
-----------------
Sample and Display
-----------------
-----------------
Weather Sampling
-----------------
Bad data from WXLink, discarded new data. Kept old
-----------------
-----------------
SunAirPlus Not Present
-----------------
-----------------
-----------------
-----------------
AS3935 Lightning Detector