19
Page
Version 1.3 October 2020
F016TH Indoor
Thermo-hygrometer Transmitter installation.
If you are mounting it outside, it is
recommended you mount the F016TH Thermo-hygrometer sensor outside in a shaded area. A north facing
wall is preferred because it is in the shade most of the day. Direct sunlight and radiant heat sources will result
in inaccurate temperature readings. Although the sensor is water resistant, it is best to mount in a well
protected area, such as under an eve. Use a screw or nail (not included) to affix the remote sensor to the wall,
as shown in Figure 16. The F016TH is generally for use indoors.
Figure 16
Low Battery Icon
A low battery indicator icon is shown in the display window for F016TH thermo-hygrometer sensor. When the
low battery icon appears (the battery voltage is lower than 2.4V), replace the batteries in the sensor with fresh
batteries. Be sure to never mix old and new batteries, and never mix battery types such as alkaline and lithium
together.
Both the F016TH and the FT-020T Sensor Array report a low battery condition in the transmitted messages.
When the low battery data appears (the battery voltage is lower than 3.6V), replace the batteries in the sensor
with fresh batteries. Be sure to never mix old and new batteries, and never mix battery types such as alkaline
and lithium together.
Specifications
