SwitchBot W2500020 User Manual Download Page 14

Passcode Unlock

21

22

• 

Amount of passcodes supported:

 You can 

  set up to 100 passcodes, including 90 

  permanent passcodes, temporary 

  passcodes and one-time passcodes totally 

  and 10 emergency passcodes. When the 

  amount of passcodes added has reached 

  the max. limit, you will need to delete 

  existing passcodes to add new ones.

• 

Passcode digit limit:

 you can set a 

  passcode of 6 to 12 digits.

• 

Permanent passcode:

 passcode that is 

  valid forever.

• 

Temporary passcode:

 passcode that is valid 

  within a set time period. (Time period can be 

  set up to 5 years.)

• 

One-time passcode:

 you can set a one-time 

  passcode that is valid for from 1 to 24 hours.

• 

Emergency passcode:

 the app will send 

  you notifications when emergency passcode 

  is used to unlock.

• 

Emergency unlock notifications:

 you will 

  only receive emergency unlock notifications 

  when your Keypad Touch is connected to 

  a SwitchBot Hub.

• 

Falsely triggered emergency unlock:

 With 

  the anti-peep technology, when the random 

  digits you entered contain an emergency 

  passcode, your Keypad Touch will regard it 

  as an emergency unlock first and will send 

  you notifications. To prevent situations like 

  this, please avoid entering digits that may 

  compose an emergency passcode you've set.

• 

Anti-peep technology:

 You can add 

  random digits before and after the correct 

  passcode to unlock so people around you 

  won't know what your real passcode is. You 

  can enter up to 20 digits to include the real 

  passcode.

• 

Security settings:

 Your Keypad Touch will 

  be disabled for 1 minute after 5 failed 

  attempts to enter your passcode. Another 

  failed attempt will disable your Keypad 

  Touch for 5 minutes and the disabled time 

  will increase by double with following 

  attempts. The max. disabled time is 24 

  hours, and each failed attempt after that 

  will cause it to be disabled for another 

  24 hours.

• 

Set passcode remotely:

 requiring a 

  SwitchBot Hub.

Summary of Contents for W2500020






















Reviews: