Switch HTB20039B Installation Manual Download Page 5

After making electrical connections, spliced conductors should be turned upward and pushed 
carefully up into outlet box. The wires should be spread apart with the grounded conductor and 
the equipment-grounding conductor on one side of the outlet box.

WARNING: 

To reduce the risk of electrical shock and fire, do not use this fan with any solid-state 

fan speed control device, or rheostat.

Do not separate the reverse switch until the fan has come to a complete stop.

Do not insert anything into the fan blades while they are rotating.

WARNING:  

To reduce the risk of personal injury, do not bend the blade brackets (also referred to 

as “flanges”) during assembly or after installation. Do not insert objects in the path of the blades.

To avoid personal injury or damage to the fan and other items, be cautious when working around 
or cleaning the fan.

Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly 
dampened cloth will be suitable for most cleaning.

WARNING:

  Chemical Burn Hazard. Keep batteries away from children. This remote contains a 

lithium button cell battery. If a new or used lithium button/coin cell battery is swallowed or enters 
the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always 
completely secure the battery compartment. If the battery compartment is not closed securely, 
stop using the product, remove the batteries, and keep it away from children. If you think 
batteries might have been swallowed or placed inside any part of the body, seek immediate 
medical attention. Dispose batteries properly and keep away from children. Even used batteries 
may cause injury.

11

10

12

13

14

15

16

9

02

The important safety precautions and instructions appearing in the manual are not meant to 
cover all possible conditions and situations that may occur. It must be understood that 
common sense and caution are necessary factors in the installation and operation of this fan.

This product is not intended for use by people (including children) with reduced physical, 
sensory or mental capabilities are different or are impaired, or lack of experience or 
knowledge, unless such persons are supervised or trained to operate the appliance by a 
person responsible for their safety.

Children should be supervised to ensure that they do not use appliances as a toy.

NOTE:

NOTE:

NOTE:

Summary of Contents for HTB20039B















Reviews: