SWIT S-4915T/R, User Manual

Page: 9 / 11

7. Optional Battery Plate
7.1 S-4915T And S-4915R Battery plate choice
S-4915T is equipped with DV battery plate to be powered by standard DV batteries. There’re following
different types of DV batteries for choice:
Plate type Compatible battery Recommended SWIT battery
F SONY L series NP-F770/970 S-8972, S-8970, S-8770
U SONY BP-U60/30 S-8U93, S-8U63
D
Panasonic CGA-D54S/D28S
Panasonic VW-VBD58
S-8D62, S-8D58
B Panasonic VW-VBG6 S-8BG6
J JVC BN-V428 S-8428
V JVC BN-VF823 S-8823
I JVC SSL-JVC50 S-8I50
C Canon BP-930/945/970G S-8945, S-8845
E Canon DSLR battery LP-E6 S-8PE6
Note: The battery plates are fixed on S-4915T and S-4915R at factory, please specify the suitable plate type
before purchase.
8. Trouble-Shooting
If the receiver failed to output video correctly, the possible causes are as below; please find the solution from
following chart:
The receiving video Possible Causes Solution
No display
No power
Check power connection and switch on
the transmitter and receiver
The antennas are not installed
properly and screwed tightly Install the antennas properly and screw
tightly of both transmitter and receiver
Bad connection of video cable
Check video cable connection of both
transmitter and receiver
Video format is not supported
Check the format of video source.
(See the supported video formats at
9. Specifications .)
Video quality is poor
Bad connection of video cable
Check video cable connection and if
possible, change to better quality cables.
The wireless transmission is
disturbed by environment, such as
other electronic devices in the
same location.
Wait for one minute or reboot both the
transmitter and receiver
The transmission distance is out of
effective range or being interfered
by obstacles.
Try the wireless transmission at a closer
distance or clean out the obstacles