5
Product instruction
Transmitter S-4904T
Front view Rear view
⑴、⑵
LED status indicators:
Including Video Signal and Power indicators
⑶
Wireless frequency dial switch
Set frequency range from 0
～
9, in total 10 channels
⑷
SDI in
：
3G/HD/SD-SDI input (BNC connector)
⑸
HDMI in
：
HDMI input (HDMI-A type connector)
⑹
On/Off
：
Switch the power on/off
⑺
DC in
：
Support DC 6.5-17V voltage input, 5.5mm/2.1mm. Outside: negative, Inside: positive
⑻
Power installer:
To be installed on Gold mount or V-mount cameras
⑼
Antenna
⑽
Battery Plate:
Gold mount or V-mount battery plate optional. See details in “Optional Battery Plate”
⑾
Installation thread
：
1/4”-20 thread. Use the package supplied articulating arm trestle to install the device to the camera.
The description of LED status indicator
Device
Indicators
Status
Description
S-4904T
transmitter
Power
Constant On
Power connected and switched on
Off
Power disconnected or switched off
Video
Constant On
Network is connected, and there is recognizable
video signal input
Off
Network connection failed and there is no
recognizable video signal input
Summary of Contents for S-4904P
Page 12: ......
