Rear view
⑴
Battery plate Install:
V-mount or Gold mount battery plates install position, with a hole to connect the battery plate power wires
to the main board inside.
⑵
DC IN 11V-17V BACK UP:
Connect with 4-pin XLR power adaptor (Pin 1: Negative, Pin 4: Positive)
⑶
DC IN 11V-17V MAIN:
Connect with 4-pin XLR power adaptor (Pin 1: Negative, Pin 4: Positive)
⑷
VESA Mount:
Standard 10×10cm VESA bracket installation
⑸
TALLY controlling port
(DB-9)
⑹
SDI-LOOP:
3G/HD/SD-SDI loop through output (BNC connector)
When SDI-IN2 is displayed, the SDI-LOOP outputs the SDI-IN2 signal, and when SDI-IN1 or other input
sources are displayed, the SDI-LOOP outputs the SDI-IN1 signal.
⑺
SDI-IN1:
3G/HD/SD-SDI input (BNC connector)
⑻
HDMI-LOOP:
HDMI loop through output
⑼
AUDIO-IN:
Analog stereo audio input (3.5mm)
⑽
HDMI-IN:
HDMI input
⑾
SDI-IN2:
3G/HD/SD-SDI input (BNC connector)
⑿
CVBS-IN:
Composite video input (BNC connector)
Input formats
Input
Supported formats
CVBS
PAL / NTSC
480i / 576i / 480p / 576p
720p (60 / 59.94 / 50)
1080i (60 / 59.94 / 50), 1080psf (30 / 29.97 / 25 / 24 / 23.98)
HDMI
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
SMPTE-425M
1080p (60 / 59.94 / 50)
1080i (60 / 59.94 / 50)
SMPTE-274M
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
SDI
ITU-R BT.656
576i (50)
Summary of Contents for S-1221F
Page 12: ......
