SWIT S-1053F, User Manual

Page: 7 / 19

7
Operation Instructions
⑴
User definable function keys
（
F1
～
F3
）
User can set F1
～
F3 keys to corresponding function for quick operation according to their needs.
For example
：
User can set F1 to “Focus Assistant”, and press F1 to directly switch the focus
assistant parameter, the sequence is “Red
→
Blue
→
Off”.
Quick function keys support multi definition, for details please refer to “4.Function key settings” in
the “MENU” section.
When user press function keys more than 3 seconds, it will pop-up a function definable menu,
user can rotate knob or press this function key to select required functions, and press the knob to
confirm the selection. If no operation exceeds 3 seconds, the monitor will automatically save the
selection and Exit.
When open the main menu, user can press F3 to directly exit the menu.
⑵
Multifunctional knob
 Main menu settings
When no menu is opened, user can directly press the knob, and open the main menu on the left
top of the screen;
Rotate the knob, select corresponding submenu; the corresponding item is highlighted in yellow;
Press the knob, enter the submenu;
Rotate the knob to select items; the corresponding item is highlighted in yellow;
Press the knob, the parameter of the item is highlighted in yellow;
Rotate the knob to select the parameter and press to save the settings.
 Adjust volume, image display parameters
When no menu is opened, directly rotate the knob to adjust volume or the image display
parameters (brightness, contrast, saturation) in clockwise direction, parameter value will be bigger,
in counterclockwise direction, parameter value will be smaller.
When open the volume/image display parameters menu, press the knob to save the previous
settings, then pop up to the second setting item, the parameter will change and follow the
sequence “Volume
→
Brightness
→
Contrast
→
Saturation”.
Note: When using the knob to adjust the volume and image display parameters, it has memory
function. For example if you adjust brightness before, then when there is no menu opened and
you directly rotate the knob it will adjust the brightness parameter.
⑶
Micro USB port: Connect external storage device, for firmware upgrades.
⑷
PHONE: 3.5mmheadphone jack, can monitor SDI, HDMI embedded audio.
⑸
SPEAKER: Monitor HDMI.SDI embedded audio (connecting 3.5mm audio output, the speaker is
off).
⑹
DC IN: Round head DC power supply interface (Outer: Negative, Inner: Positive)