SWIT M-1072A User Manual Download Page 4

Page: 4 / 12

1. Features

◆

High resolution 7-inch LCD Panel

16:9, 1024×600 FFS LCD panels, with 900:1
contrast, H/V 160° wide viewing angle, and
19-inch 3U rack mount

◆

High performance speaker

Equipped with high performance 3.0-inch
magnetically shielded coaxial speaker, and
the frequency response range is
130Hz(±5Hz)

～

22KHz.

◆

Multiple inputs

2×HD/SD-SDI input , 1× HDMI input

◆

Loop through outputs

Each of the 2 input HD/SD-SDI and HDMI
has loop through output.

◆

SDI and HDMI embedded audio output

Output SDI and HDMI embedded audio via
speaker and 6.35mm audio socket.

◆

VU/PPM meters display

Under SDI or HDMI, support ch1, 2 audio
VU/PPM meters display. The audio bar is
green, and will turn yellow when audio level
exceeds -20dB, and will turn red when
exceeds -9dB.

◆

Loudness* meter display

Under SDI or HDMI, support stereo loudness
meter and real-time loudness value display.
The loudness value will turn yellow when
exceeds -36LKFS, and will turn green when
exceeds -26LKFS, and will turn yellow when
exceeds-22LKFS.

◆

Loudness waveform

Record and trace a period time of loudness
values by waveforms; Support the past 1
minute period and user defined time period,
and display the average loudness values

◆

Loudness histogram

Count a period time of loudness values and
display histogram; Support the full time range

when signal is connected and user defined
time period, and display the average
loudness values.

◆

Audio Lissajous pattern display

The Lissajous pattern provides
instantaneous feedback of the left/right audio
channel distribution. The pattern orientation
indicates at a glance whether the present
audio is balanced or concentrated to either
side. The 45 ° oblique line refers to right
channel and 135 ° oblique line refers to left
channel.

◆

Quad display / Full screen display

Quad display video and all charts, each
quarter can be set to one of the charts or the
video display and can be displayed in full
screen.

◆

Underscan/Overscan

There is a function key on the front panel,
which permit users to change between
Underscan and Overscan mode.

◆

SD scale marker

Under HD input, the monitor can display a
center 4:3 scale marker, to help the image
composition for SD broadcasting

◆

Zoom in

Supports real-time zoom in from the center
area.
Zoom1: Canon DSLR scale zoom-in
Zoom2: Pixel to Pixel zoom-in