8.
Trouble shooting
If the receiver failed to output video correctly, the possible causes are as below; please find the solution from
following chart
：
The receiving
video
Possible causes
Solution
No display
The transmitter receiver is not
powered on
Check power connection and switch on
the transmitter and receiver
The antennas are not installed properly
and screwed tightly
Install the antennas properly and screw
tightly of both transmitter and receiver
Bad connection of video cable
Check video cable connection of both
transmitter and receiver
Video
format
is
not
supported
Change the output video format of the
camera
Poor
Video
quality
Bad connection with video cable Reconnect
reliably
The wireless transmission is disturbed
by environment
Wait for 1 minute or reboot the
transmitter and receiver
The transmission distance is out of
effective range
Close the transmitter to the receiver
