background image

 

Preface

 

Congratulations on your purchase of this product. Please read this user manual carefully. 

 

1

 All internal technologies of this product are protected, including device, software and trademark. 

Reproduction in whole or in part without written permission is prohibited. 

2

 All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks 

in this user manual are the property of their respective owners. 

3

 Due to constant effort of product development, SWIT reserves the right to make changes and 

improvements to the product described in this manual without prior notice. 

4

 The warranty period of this product is 2 years, and does not cover the following:   

(1) Physical damage to the products. 

(2) Any damage caused by using third-party power adaptors. 

(3) Any damage or breakdown caused by use, maintenance or storage not according to the user 

manual. 

(4) The product is disassembled by anyone other than an authorized service center. 

(5) Any damage or breakdown not caused by the product design, workmanship, or manufacturing 

quality, etc. 

5

 For any suggestions and requirements on this product, please contact us through phone, fax, Email, 

etc. 

 

 

 

 

 

 

SWIT Electronics Co., Ltd. 

Address: 10 Hengtong Road, Nanjing Economic and Technological Development Zone, 
                  Nanjing 210038, P.R.China 
 
Phone: +86-25-85805753 
Fax: +86-25-85805296 
Email: [email protected] 
Website: http://www.swit.cc 
 

Summary of Contents for E-1040P













Reviews: