Telephoning
Note
• You cannot use the
INT
key if the call duration is not displayed.
• If the second handset does not answer, you can end the ringing signal and
return to the original call by pressing the softkey under
END
.
• Internal enquiries are managed by the base station and are not dependent
on your network operator’s available services.
Brokering and Conference
You have two active calls (1 internal and 1 external), one of which is on hold.
1. Press the key
INT
or the softkey under
OPTIONS
,
BROKERING
to switch between
the call partners. Press the softkey under
OPTIONS
,
CONFERENCE
to connect all three
call partners with each other.
2. Press the softkey under
OPTIONS
,
END OF CONFERENCE
to end the conference and
return to brokering.
3. Press
to end one of the calls. The remaining call partners are automatically
connected with each other.
Note
Brokering between two external call partners is managed by the public
telephone network and is therefore dependent on your network operator’s
available services (network functions).
20405435en_ba_d0
22