Avena 248TE
Avena 248TE
83
-
Contrast
- Set the desired display contrast.
Handset settings
(only available on the handset)
•
Press
Menu
, select
Settings
and press
OK
.
• Select
HS Settings
and press
OK
.
•
Select a function from the list using the navigation keys
†
/
π
and press
OK
.
-
Select Base
- Select the desired base station.
-
Language
- Select the desired display language.
-
Auto Answer
- Just pick up the handset from the base to answer a call (without
pressing any key).
-
Register
- Accessory handsets must be registered to the base station (see
chapter “Register new handsets”).
-
De-register
- Select the handset you want to deregister.
-
Reset handset
Base station settings
(available on the base)
•
Press
Menu
, select
Settings
and press
OK
.
•
Select a function from the list using the navigation keys
†
/
π
and press
OK
.
-
Language
-
De-register
- Select the handset you want to deregister.
-
Ring Priority
- If several handsets are registered to your base station, all
handsets ring at the same time. You can select a single handset to ring first and
assign the number of rings (2, 4, 6 or 8 rings).
-
Dial Mode
- Tone: Normal dialling procedure on analog lines. Pulse: May be
required for connecting older telephone systems. Please refer to the relevant
documentation.
-
Flash Time
- Select the flash time for the analogue network functionalities in
your country.
-
First Ring
- The first ring is suppressed. The base rings only after the second
ring.
-
Full ECO Mode
- When Full ECO Mode is set to ON, the handset’s power trans-
mission is regulated and a radiation reduction is achieved when it is near the
base station.
-
Manual ECO
- Select the desired ECO Mode range (big/small room).
-
System PIN
- You can modify the PIN code (0000 on delivery).
-
PBX Access
- If you are connected to a PBX, you may need to enter an access
code to allow the public exchange to assign an external line for external calls.
-
System Reset