3
CHARGING
1.
Before first time use, fully charge the built-in battery.
2.
Connect the Type-C USB Cable (included) between the USB
Type-C
port on the speaker, and a USB port on a computer
or USB AC-Adapter.
Battery status
LED indicator
Low battery (<20%)
Blinking Red (sound prompts 3 times at
20%, 10%, and power off)
30% charged
1st white light flashes
30%-70% charged
2nd white light flashes
70%-99% charged
3rd white light flashes
3 solid white lights
Fully charged
Note
: When the battery charge <5%, the speaker will power off
automatically.
POWER ON
Power On Press power button
!
until you hear a rising tone and
LED indicator light on.
Power Off Press power button
!
until hear a descending tone
and LED indicator light off.
BLUETOOTH CONNECTION
Make sure that the speaker is within 10 meters from your mobile
device,
1.
Press power button
!
until you hear a rising tone and LED
indicator fast blinking blue.
2.
Go to the Bluetooth settings on your mobile device, search and
select “BX 840 TWS” from the list.
3.
Once paired, the Bluetooth LED indicator turns solid blue.
Note
:
• When power on, the BX 840 TWS automatically reconnects to
the last mobile device it was connected to. (The BX 840 TWS
can memorize maximum of 8 paired devices).
• The BX 840 TWS will automatically shut down after 10 minutes
in pairing mode if no devices are paired for power saving.
Summary of Contents for BX 840 TWS
Page 1: ...Instructions BX 840 TWS EN...
