9
amplitude,acceleration speed
is relating date. When you adjust the Hz,
the amplitude and
acceleration speed will change accordingly. You can adjust Hz by put
、
, you can
adjust Hz one by one, the adjust scope is 15Hz-60Hz. If you want put
for a while,the Hz
will adjust 5 Hz once for all. You can not adjust amplititude and accelerate speed, they are just
the show changing when you adjust HZ and L/H,
3. You can adjust L/H before operating machine or during machine working.
4. When the machine finish operating according to your choice TIME, Hz, H/L,
It will keep same
pre-setting, when you put
again, the machine will
operate according to pre-setting.
PRE-PROGRAM
1.
When you put
button, you will enter program, put
button once, you will choose
program 1; put
button twice, you will choose program 2; put
for third time,
you will choose program 3; put
button fourth time, you will choose program 4.
2.
When you choose pre-programm, there two part showing in the console,
one part show
exercise position, another part show working date such as TIME, HZ, AMPLITITUDE,
ACCELERATE SPEED. Every program have six different exercise position, different exercise
position
mean
different
section,
different
exercise
position
have
diffirent
TIME,HZ,AMPLITUDE, ACCELERADE SPEED. If you want to begin to exercise from
Position 2, when you enter PROG 1, then you put
, to choose your favoriate exercise
position.
3.
If you want to enter manual program, after you put
for fourth time, the console will
enter Manual program.
4.
If you want to enter user programe, put
, if you need pause during exercise, put
,
when you put
again, the machine running the left program.
USER PROGRAM
1. Put
button enter user program. The user program place in 3 difference area U1,U2,U3.
Every user program have 10 sections( the time have 10 diffirent section). When you enter user
program, you can set the time in minute by put
、
button, then you can set time in
second. When you finished time setting, put
button you can set the Hz.. When you
