2.2 Inserting the battery and
changing the battery
Lift up the lid of the beacon, on one side there is a bar to
help hold the base plate.
Remove the battery or place the new and full battery in the
bottom of the SOS-Beacon housing with the negative pole
facing up.
Gently press the cover onto the SOS-Beacon until it clicks
into place.
3 General Information
3.1 Disclaimer
Swissphone gives no liability or guarantee in connection
with the content of this document. We reserve the right to
make changes to the contents of the operating instructions
for the SOS-Beacon.
3.2 Terms of use
The information contained in this document is protected
by copyright and confidential and may not be passed
on or reproduced without the prior written consent of
Swissphone Wireless AG.
3.3 Applicable law
These terms of use are subject exclusively to Swiss law.
The Vienna Convention on the International Sale of Goods
is excluded. The General Terms of Business of Swissphone
Wireless AG apply.
E
N
0
8/
20
20
0343
24
5
V1 W
E
C
Information is pr
ovided subject to technical modifications, err
ors and typing err
ors.
Art. Nr. 0800200
ATTENTION
Observe precautionary measures regarding
the handling of electro-statically sensitive
devices. Do not touch the circuit board
without protection.
Swissphone Wireless AG
Fälmisstrasse 21
CH-8833 Samstagern
Tel.
+41 44 786 77 70
Fax
+41 44 786 77 71
E-Mail [email protected]
