Now the app will display the parameters according to the rights hat have been defined
in PSWplus. In the example below all “Start” parameter will not be shown in the App, as
there are no rights assigned (-). Alert patterns can be viewed (show) but not changed,
while Display parameters and Terminal Handling may be changed from the App.
Bluetooth-Settings of a s.QUAD in PSWplus.
Rights are as followes:
"-"
No rights, settings not visible in App.
"Show"
The current settings will be shown in the app, but may not be changed.
"Edit"
Settings can be viewed and changed using the app. Once they are written to
the device, they will become effective.
Activeate Bluetooth using PSWplus and on s.QUAD
Depending on how s.QUAD is configured, the Bluetooth menu may already be
available in your s.QUAD. Usually in “Settings
Bluetooth”. Here you can enable /
disable Bluetooth.
In case the menu is missing, you may add it to s.QUAD using PSWplus. Simply
“drag & drop” it to the appropriate place inside “Active menu”.
Install App: Google Play and Apple App-Store
On Apple terminals you can find s.QUAD App in the App-Store. Alternatively, please
navigate to the following link:
https://itunes.apple.com/de/app/s-quad/id995920716
You can find s.QUAD App for Android inside Google Play using this link:
https://play.google.com/store/apps/details?id=swissphone.sone.pager.droid
Please note that your device must support Bluetooth > = 4.0 in case it does not,
installing will not be possible.
Activate Bluetooth
s.QUAD
Install App
