Swissphone Telecommunications AG
manual RE529 V1_00.doc
September 25
th
2003
Fälmisstrasse 21 // 8833 Samstagern
edition 1.00
Switzerland
PMA/D000xxx
page 4/7
2 The complete LC Display of your unit
2.1 Acoustic ON
Incoming calls will be signalled simultaneously with a call signal and a vibration. In addition, the light
display blinks in the upper left corner. Following these signals, you will hear the spoken announcement
via the loudspeaker.
2.2 Mini-Beep
Incoming calls are indicated by the vibrator, and then with short beep tones. The LED in the upper left
corner also blinks. Finally, following these signals, you will hear the spoken announcement.
2.3 Acoustic OFF
Incoming calls are signalled only by the vibrator. There is no acoustic alarm, and no spoken
announcement is heard.
2.4 Monitor
In this operational mode, you can hear everything that is spoken over the set radio channel. Calls
addressed to you will be signalled "acoustically". If you wish to switch off the continuous monitoring /
listening operation, select one of the acoustic symbols with key (1), and confirm this with key (2).
Memo pagers with the voice memory will record the spoken message when the programming of the
voice memory has been assigned to the appropriate address and the alarm type has been set to
"Voice" or "Tone and Voice" status.
In monitor mode, spoken message will only be recorded, when the proper address has been activated
(see profiles). Memo pagers have a total recording time of 240 sec which can be set to portions of 20,
30, 40 or 60 sec. Due to the programming, these portions can be assigned in a fix or dynamic mode.
battery recognition
ON OFF
BA
T
T
E
RY
acoustic ON
call recognition
battery status indicator
volume adjustment
message
field strength alarm
3 digit display
ON / OFF sign
for different functions
Minipiep
acoustic OFF monitor
acoustic ON
