I.SITE III User Manual
© SWISSPHONE Wireless AG
Version 1.1
Page 14/20
5
Technical Data
Transmission unit (TX)
Frequency bands VHF4m / VHF2m /
UHF
66-88MHz / 136-174MHz / 400-470MHz / 450-530MHz
Transmitting power
Adjustable ex works for: 1 to 25 W
Channel separation
12.5/20/25kHz
POCSAG Transmission rate
512, 1200, 2400 baud
Antenna port
N-Type (female) 50
Ω
/port for external antenna
Duty cycle
33% at 25W (@ 131°F)
Interface
LAN
1x RJ45 (100 Mbps)
Call dog
Proprietary call logs (available on request)
Control
PC software or through third-party providers
Fault status reports
FS01
Unstable transmitting frequency (PLL Unlocked)
FS02
Fault in transmission unit TX (High FWD/low REV power or TX
excess temperature)
FS03
No operating voltage present (AC Power Fail)
FS04 (optional)
Operating voltage of backup battery below threshold value
(ACCU Low)
FS05
Incorrect transmitter keying (TX Not Allowed)
General
Backup battery (optional)
12 V / 2,3 Ah
charging port + battery low d deep discharge
protection
Input contacts (optional)
Three contact inputs (E1, E2, E3 (open/close)) for triggering
messages (edge triggered, potential-free 5 - 15 V, debounced
to 100 ms)
Service contact (optional)
One door contact (open/close) for triggering messages during
servicing
Operating temperature range
-4 °F to +131 °F // -20 °C to +55 °C
Input voltage (AC)
90-264VAC
Power consumption (max. 230 V)
5 W (stand-by), 75 W (sending at max. 25 W)
Protection class
IP65
Dimensions (H x W x D)
15.8 x 8.3 x 4.7 inches // 400 x 210 x 120 mm
Weight
264.75 oz. // 7.5 kg (without optional backup battery)
Conformity
Data transmission
ETS 300 279, ETSI 300 113
Electromagnetic compatibility
EN 301489-05, EN55022
Security
EN 60950
