2.3 Function display
As soon as the beacon is powered by the power supply
unit, a green light is visible. If there is no power supply from
the power supply unit, the indicator goes out.
Note: In direct sunlight, the function indicator may not
be visible.
2.4 Changing the backup battery
Loosen the screw on the bottom of the SOS-Beacon
Infinite Life. Afterwards, the lid can be easily lifted.
Remove the old batteries and place the new, full batteries
in the battery compartment, where the correct battery
polarity is indicated.
Put the lid back on the base and screw it from below with
the screw that you removed earlier.
Please note that the batteries are only intended as back-up
batteries. For continuous operation the power supply
should be provided by the mains adapter.
ACHTUNG
Observe precautionary measures regarding
the handling of electro-statically sensitive
devices. Do not touch the circuit board
without protection.
3 General Information
3.1 Disclaimer
Swissphone gives no liability or guarantee in connection
with the content of this document. We reserve the right to
make changes to the contents of the operating instructions
for the SOS-Beacon Infinite Life.
3.2 Terms of use
The information contained in this document is protected
by copyright and confidential and may not be passed
on or reproduced without the prior written consent of
Swissphone Wireless AG.
3.3 Applicable law
These terms of use are subject exclusively to Swiss law.
The Vienna Convention on the International Sale of Goods
is excluded. The General Terms of Business of Swissphone
Wireless AG apply.
E
N 1
2/
20
21 0
34
32
49 V
2 W
E
C
Information is pr
ovided subject to technical modifications, err
ors and typing err
ors.
Swissphone Wireless AG
Fälmisstrasse 21
CH-8833 Samstagern
Tel.
+41 44 786 77 70
Fax
+41 44 786 77 71
E-Mail [email protected]
Art. Nr. 0800206
